Plain-language guide
How tariff stacking works
A plain-language guide to how U.S. duties add up on one import: the ordinary duty, the Chapter 99 additional duties, where the tariff schedule says two duties do not apply together, and how to work an entry in order.
In short
- An import can owe several duties at once. The ordinary duty for the product comes first. Additional duties in Chapter 99 of the tariff schedule are then added, one program at a time.
- The default is that they add up. Most programs say in terms that their duty applies in addition to the ordinary duty and to other additional duties.
- The exceptions are written into the schedule. Where a program says its duty "shall not apply" to goods covered by another program, the two do not stack. Nothing else is an exception.
- Each program taxes its own base. Most apply to the full customs value. A few apply to part of the value, such as non-U.S. content.
- Antidumping and countervailing duties sit on top of all of this and are not shown in the tariff schedule.
The layers on one entry
- The ordinary duty. This is the rate for the product's classification in chapters 1 to 97: the Column 1 General rate, or a Special rate if the goods qualify under a trade agreement.
- Additional duties in Chapter 99. Each program has its own headings beginning 9903. Today these include Section 232 (metals, vehicles and parts, trucks, wood products, semiconductors, pharmaceuticals, unmanned aircraft), Section 301 (China, Brazil, and a July 2026 action covering 60 economies), Section 338 (listed Canadian goods) and Section 201 (quartz surface products).
- Antidumping and countervailing duties, if the product is within the scope of a case. These are set case by case and are not in the schedule.
- Fees. Customs fees are separate from duties and are outside this guide.
IEEPA duties are no longer a layer. They ended in February 2026 and are being refunded: see how IEEPA refunds work. The 10% Section 122 surcharge had a stated period ending July 24, 2026; use the entry date before treating it as part of an entry.
The default: duties add up
Chapter 99 starts from the opposite presumption. Its first note says that a Chapter 99 rate applies "in lieu of the rate provided therefor in chapters 1 to 98" unless the context requires otherwise. So each program that is meant to be added says so, in words like these:
Notwithstanding U.S. note 1 to this subchapter, all products of China that are subject to the additional 25 percent ad valorem rate of duty imposed by heading 9903.88.01 shall also be subject to the general rates of duty imposed on products of China classified in the subheadings enumerated in U.S. note 20(b) to subchapter III.
all products that are subject to the additional ad valorem rates of duty imposed by headings 9903.05.20–9903.05.84 shall also be subject to any additional duty provided for in this subchapter or in subchapter IV of chapter 99.
The Section 232 notes say the same thing about trade agreements and trade remedies. A Special rate under a free trade agreement does not remove the Section 232 duty, and antidumping and countervailing duties continue:
the duties provided in these headings shall be collected in addition to any special rate of duty otherwise applicable under the appropriate tariff subheading.
All antidumping, countervailing or other duties and charges applicable to such goods shall continue to be imposed.
Where the schedule says duties do not stack
These are the non-stacking rules in the current edition. Each is a quotation or a direct reading of the note cited. If a pair of programs is not listed in a note as an exception, the default applies and both duties are owed.
| Rule | What it means | Where it is written |
|---|---|---|
| One metals heading per article | The Section 232 metals headings are "mutually exclusive, such that an imported article will be subject to no more than one of these headings." An article is not charged the steel rate and the aluminum rate together. | U.S. note 16(a), page 236 |
| Vehicles are not also charged the metals duty | Passenger vehicles and light trucks under the Section 232 automobile headings "shall not be subject to" the Section 232 metals duties. The same applies to their parts. | U.S. note 33(a) and (f), pages 518 to 520 |
| Medium- and heavy-duty vehicles are not also charged the metals duty | Medium- and heavy-duty vehicles "shall not be subject to" the Section 232 metals duties. The same applies to their parts. | U.S. note 38, pages 534 and 535 |
| Semiconductors are not also charged the vehicle or metals duties | Semiconductor articles "shall not be subject to" the Section 232 duties on passenger vehicles and light trucks, their parts, medium- and heavy-duty vehicles, their parts, or metals. | U.S. note 39(a), page 537 |
| The 60-economy Section 301 duty steps aside for Section 232 goods | That duty "shall not apply" to articles covered by the listed Section 232 headings: metals, vehicles and their parts, wood products, trucks and their parts, semiconductors and patented pharmaceuticals. | U.S. note 52(f), page 577 |
| The Brazil Section 301 duty steps aside for Section 232 goods | The 25% Brazil duty "shall not apply" to the same Section 232 articles. | U.S. note 50(a)(vi), page 556 |
| One of the three Canada Section 338 headings steps aside for Section 232 goods | The duty under heading 9903.03.13 "shall not apply" to the Section 232 articles listed. The note makes no such exception for headings 9903.03.12 and 9903.03.14, so those are owed in addition to a Section 232 duty. | U.S. note 51(a) and (c), pages 556 and 561 |
A non-stacking rule removes one duty, not the others. A passenger vehicle that is excused from the metals duty still owes the vehicle duty, the ordinary duty and any other Chapter 99 duty that applies. The vehicle note says so:
any additional duty prescribed in any provision of this subchapter or subchapter IV of chapter 99 shall be imposed in addition to the duty in heading 9903.94.01.
What each duty is charged on
Stacking is not only a question of which rates apply. Each duty has its own base, and they are not always the same.
- Most additional duties are a percentage of the full customs value of the article, the same value the ordinary duty uses.
- Since April 6, 2026 the Section 232 metals duty is charged on the full customs value of a listed article, not on the value of the metal in it. See Section 232 content rules.
- A few headings apply to part of the value. For approved passenger vehicles that qualify under the United States-Mexico-Canada Agreement, heading 9903.94.03 charges 25% on the value of the non-U.S. content only.
- Some headings are a ceiling, not an addition. They top the ordinary duty up to a stated total, so the additional amount depends on the ordinary rate.
When two ad valorem duties share the same base, the percentages can be added. When they do not, they cannot, and each duty has to be computed on its own base.
A worked example
Stainless steel butt-welding pipe fittings are classified in subheading 7307.23.00, statistical line 7307.23.00.90. In the current edition the Column 1 General rate is 5%, and the line is on the list of derivative steel articles in U.S. note 16(c)(iv). Take a shipment with a customs value of $10,000 that qualifies for no special treatment.
| Layer | Rate and base | Amount |
|---|---|---|
| Ordinary duty | 5% of $10,000 | $500 |
| Section 232 metals, heading 9903.82.02 | 50% of $10,000 (full customs value) | $5,000 |
| These two layers together | 55% of $10,000 | $5,500 |
If at least 85% of the steel was melted and poured in the United States, heading 9903.82.06 applies in place of 9903.82.02 and the Section 232 layer is 10%, or $1,000. The origin of the metal changes the answer more than anything else on this line.
What the example leaves out: any antidumping or countervailing duty, any Section 301 duty that applies to the country of origin, country-specific Section 232 treatment, and fees. It shows how two layers combine. It is not a quote for any entry.
Working an entry in order
- Fix the facts: the full 10-digit classification, the country of origin, the customs value and the entry date.
- Use the tariff schedule edition in force on the entry date. Rates and notes change between editions.
- Find the ordinary duty for the line, and whether a Special rate applies.
- Go through Chapter 99 one program at a time. For each, ask whether the product is on that program's list and whether the origin is covered.
- For each program that applies, read its note for exceptions. Check whether it steps aside for another program on the same goods, and whether an exclusion covers the product.
- Compute each duty on its own base.
- Check antidumping and countervailing duties separately, in CBP's AD/CVD Search ↗.
- Confirm the result with a licensed customs broker before filing.
The tariff search does steps 2 to 4 for a code, origin and date, and links each matching note to its page in the retained schedule.
Older entries
Everything above describes the current edition. Entries from 2025 and early 2026 were governed by different rules, including IEEPA duties and a 2025 order on which of several duties applied to the same article. Use the change register for the dated record and the edition in force on the entry date, not this guide.
Sources
- USITC: Harmonized Tariff Schedule, Chapter 99 ↗
The quotations are from the retained Chapter 99 of the edition named above; each links to its page.
- CBP: AD/CVD Search ↗
- USTR: Section 301 action covering 60 economies, implementing notice ↗
- Proclamation 11076: Canada Section 338 scope, October 2026 ↗
Every dated statement in this guide has a record in the change register, and each retained document is listed in the evidence register. If a guide and an official source differ, the official source controls.